SONGHUAJIANG MODEL 5575 FILM PROJECTOR

I. Main Feature
1.Close drive system, cabinet style of an organic whole structure. The projector head uses no gear full new design.
2.the model uses self-grease bearing, no oil dripping. Machine noise is less than 65dB.
3.Bending film gate with springiness steel tape, triple-lens turret is coupled change with the metal curtain film gate.
4.Cone shutter can heighten the effective light flux.
5.Supply digital and analogue red LED sound reproduction system according to customer’s demand, and supply red light source in it.
6.Lens conversion is selected freely, and control remotely to show automatically.
7.Can use full automatic showing control system for single-screen and multi-screen.
8.Water-cooling film gate system in it.
9.Converse high efficiency rectifier in it.
10.The series projector can use 600m or 2000m magazine, and use platter bracket.
II. Main performance
1.Stabilization for film in film gate: transverse shaking <0.015mm, lengthways shaking <0.02mm.
2.Screen menu definition: centre≥68 line/mm, edge≥56 line/mm.
3.Xenon lamp power 3KW-5KW, light power≥3.5lm/w.
4.Illumination uniformity: ≥65%
5.Shaking: <0.14%.
6.Machine noise: <65Db
7. 7Power: 3 phase 4 line 380V 50HZ
8.Outline dimension: (L)1382mmX(W)516mmX(H)1974mm.
9.Weight: 350kg

SONGHUAJIANG 5565 FILM PROJECTOR

Main Feature
Xenon Lamp power:3-5KW.
365mm drill axle cold reflector, ≥3.5 LM/w.
Bending film gate, springiness steel tape and exchangeable curtain film gate.
Lens stand of electric triple-lens turret, may realize long distance control.
Use Dolby SR sound reproduction system with analogue red LED reader, SR D digital red light and DTS multi-system digital sound reproduction system.
The diameter of three units level plates is 1000mm, film capability is 4000mm, may show 146 minutes (two hours twenty-six minutes) continuously.
Three-story plate function:1 and 2 are pay-out and take-up each other, the lowest plate stories film.
This machines is still equipped with pay-out and take-up each other, the lowest plate stories film.
Platter uses polarization slice photoelectricity coupling governor machine. It is patent technology.
Dimensions: 1511×1000×1900mm? Weight:368kg.

SONGHUAJIANG MODEL 5545 SERIES FILM PROJECTOR

Main feature:
1.Full new design, close drive system, cabinet style of an organic whole structure.
2.Smooth film drive system, Use 24 teeth feed sprocket to improve film wrap angle and decrease film winding.
3.Bending film gate with springiness steel tape, triple-lens turret is coupled change with the metal curtain film gate.
4.Triple-lens turret rack is driven by motor. It can be electric or remote control. It is coupled change with the film gate
and anamorphic lens.
5.Cone shutter can heighten the effective light flux.
6.Stereo sound reproduction system with analogue red LED reader can add multiple-type digital stereo system.
7.Power supply of xenon lamp is two basic types of 1-3 KW and 3-5KW, elective illumination flux higher than 3LM/W.
8.Short converse rectifier efficiency higher than 85%.
9.Three-dimensional xenon lamp adjusted by hand and electric micro-change.
10.The series projector can use 600mm or 2000m magazine.
11.Water-cooling film gate system.
12.1-3KW xenon lamp using lamp using 298mm non-coaxial deep-elliptical cold reflector, 3-5KW xenon lamp using 365mm
non0coaxial deep-elliptical cold reflector.

SONGHUAJIANG 5545-KC SERIES PROGRAMMABLE AUTOCONTROL FILM PROJECTOR

Main feature:
1.Close drive system,cabinet style of an organic whole structure.
2.Programmable controller and touch screen for easy operation.
3.Control single projector or dual projectors projection automatically.
4.Control projector 's operation automatically,such as motor on/off, xenon lamp,lens change over etc.
5.Control other equipments in the auditoriunm automatically,such as auditoriun lights,curtain,epidiascope(or video projector ),sound system change over etc.
6.Both machine operation and machine control can be achieved by touch screen,also manual control of the projectors and other equipment is achievable.
7.10sets of program can be memoried, and the cinema person can woek out di fferent programs base on own managing situation er habit.
8.The timing projection of multi -showing is achievable.
9.Display thestate of program course,working state and time delay etc.
10.Have the fault diagnosing,alarming and machine stopping function in xenon lamp faults,film broken and fansfaults.
11.Smooth film drive system .use 24 teeth feed sprocket to improve film wrap angle and decrease film winding.
12.Bending film gate waywith springness steel tape, triple lens turret is coupled change with the metal curtain film gate.
13.Triple lens turret rack is driven by motor. itcan be electric or remote countrol .it is coupled change with the film gate and anamorphic lens.
14.Cone shutter can heightened the effective light fiux
15.Different sound reproduction systems are optional.
16.Xenon lamp powet is from 3kw to 5kw .effective illumination flux is higher than 3Lm/W .
17.Lnner mincrominiature converse rectier eddicency is higher than 85%.
18.Both 600m spooland 2000m spool is optional.
19.Water cooling system in film gate .