|
¡¡
|
Digital Movie Projection System
 |
FS720P-3X6000 1.3K Digital Movie Projection System
Technical Chracteristics:
The system is the combination of digital movie projection system, digital movie storage playing system and digital movie sound processing system. It totally conforms to or advanced than the standard of "Digital movie (medium level) projection system technical requirements"( GD/J014-2007) constituted by State Administration of Radio,Film and Television.
The system projection optical axis height is 1250mm . And the pedestal height is 16U, it can hold the sound and vedio systems. There are four foot wheels mounted on the pedestal, the customer can move the system freely. And there are also four fixing feets under the pedestal, then the system can be located firmly on the floor, and the system horizonal level can be adjusted, also the elevation and despression angle can be adjuted by them.
Projection system:
3 chips DLP technology: 3×0.8 " 720p 12 DC3 ( black chip ) , the effective resolution is 1280×720 @60Hz. It uses full 10bit image processing system, therefore the color number can be 71 trillion.
Dual lamps system : OSRAM 2×300W.
Under standard projection state, the uniformity is no less than 80%, and the contrast is 2000:1.
The real luminous output of the video projector: no less than 6000 lumen.
DVI-D video input interface and available with HDCP , applying for 1920×1080 24psf format.
To control the video projector by IR remote controller.
Color temperature : 650 0 ° K±1000 ° K.
Both vertical lens shift and horizonal lens shift are achievable.
The standard matching lens size: 1.44-1.8:1, and the customer can choose the prime lens or the electrical zoom lens base on the cinema dimension.
Prime lens: 0.64:1, 0.96:1
Electrical zoom lens: 1.2-1.44:1, 1.8-2.4:1, 2.4-3.6:1, 3.6-5.6:1
Storage and playing system:
Embedded system, the hardware decoding rate is 50Mb/s, low power consume and reliable system.
The max. video image output format is 1080p/24psf.
Available with DVI-D digital video output.
Intellective electric stop movie memory playing function.
Multi sound channels analog audio output.
Available with the digital movie medium projection equipment authorized system and movie projection times or schedule management, it has the function of checking the information of projection times and schedules.
10 to 15 movies can be stored.
Both pulling hard drives and USB flash memory are available to download the movie.
Digital cinema audio processing system.
Available with 6 routes audio input interface(cannon connector) and 6 routes analog audio input interface(25 pins D type connector).
Three working modes of 2-fractional frequency, 3-fractional frequency and the direct modes are achievable.
Using DSP technology to achieve the digital processing, and all the audio processings are digitals, then the noise can be deducted greatly.
It can achieve the gain control, fractional frequency and balance processing to 6 audio frequency signals of the digital cinema at the same time.
Professional digital movie decoding module.
Using the computer to set the processor through the professional adjusting software.
To compensate the architecture acoustics bug by adjusting the balance of 6 route 31 range on the software surface.
Installation parameters:
Total weight : 133KG .
Outline dimension : 840 ( length ) ×555 ( width ) ×1440 ( height ) .
Power supply : single phase, 220V 50Hz .
Input power : 900W |
 |
FS1080P-3X10000 1.9K Digital Movie Projection System
The system is the combination of digital movie projection system, digital movie storage playing system and digital movie sound processing system. It totally conforms to or advanced than the standard of “Digital movie (medium level) projection system technical requirements” ( GD/J014-2007) constituted by State Administration of Radio,Film and Television.
The system projection optical axis height is 1250mm . And the pedestal height is 16U, it can hold the sound and vedio systems. There are four foot wheels mounted on the pedestal, the customer can move the system freely. And there are also four fixing feets under the pedestal, then the system can be located firmly on the floor, and the system horizonal level can be adjusted, also the elevation and despression angle can be adjuted by them.
Projection system:
3 DMD chip DLP technology: 3×0.95 " 1080p DMD, the effective resolution is 1920×1080@60Hz . It uses full 10bit image processing system, therefore the color number can be 71 trillion.
Dual lamps system.
Under standard projection state, the uniformity is no less than 80%, and the contrast is 2000:1.
The real luminous output of the video projector: no less than 10000 lumen.
DVI-D video input interface and available with 1920×1080 24psf format.
To control the video projector by IR remote controller.
Color temperature : 650 0 ° K±1000 ° K.
Both vertical lens shift and horizonal lens shift are achievable.
The standard matching lens size: 1.39-1.87:1, and the customer can choose the prime lens or the electrical zoom lens base on the cinema dimension.
Prime lens: 0 . 67:1.
Electrical zoom lens: 1.87-2.56:1, 2.56-4.16:1, 4.16-6.96:1. br>
Storage and playing system:
Embedded system, the hardware decoding rate is 50Mb/s, low power consume and reliable system.
The max. video image output format is 1080p/24psf.
Available with DVI-D digital video output.
Intellective electric stop movie memory playing function.
Multi sound channels analog audio output.
Available with the digital movie medium projection equipment authorized system and movie projection times or schedule management, it has the function of checking the information of projection times and schedules.
10 to 15 movies can be stored.
Both pulling hard drives and USB flash memory are available to download the movie.
Digital cinema audio processing system.
Available with 6 routes audio input terface(cannon connector) and 6 routes analog audio input interface(25 pin D type connector).
Three working modes of 2-fractional frequency, 3-fractional frequency and the direct modes are achievable.
Using DSP technology to achieve the digital processing, and all the audio processings are digitals, then the noise can be deducted greatly.
It can achieve the gain control, fractional frequency and balance processing to 6 audio frequency signals of the digital cinema at the same time.
Professional digital movie decoding module.
Using the computer to set the processor through the professional adjusting software.
To compensate the architecture acoustics bug by adjusting the balance of 6 route 31 range on the software surface.
Installation parameters:
Total weight : 150KG .
Outline dimension : 995 ( length ) ×645 ( width ) ×1475 ( height ) .
Power supply : single phase, 220V 50Hz .
Input power : 1.1KW .
|
Additional Systems For Film Projection Equipments |
|
SONGHUAJIANG FK-100 cinema automatic controller
SONGHUAJIANG FK-100 cinema automatic controller is installed on the SONGHUAJIANG series projectors, and can achieve the automatic projection controlling of single cinema single projector and double projectors in multi-cinema, it can control the projector and other equipments in the cinema automatically. SONGHUAJIANG FK-100 cinema automatic controller has the advantages which are simple operation, easy programming, reliable running, general interface, and it is suitable for most cinemas all around the world.
Main features:
1.Controlling the projector automatically, such as motor on/off, sound and light door, xenon lamp, ?lens conversion and other equipments in the cinema, such as the scene light, screen, epidiascope (or projecting camera), and sound system conversion etc.
2.Controlling the operating sequence of the projector with program, and can set the functions or adjust the film tinsel position with time lag to achieve the whole automatic projection.
3.Can store 9 sets operating program, and the system programs two sets of? standard ones base on the projecting process. Besides that, the cinema also can program other 7sets program by yourself base on your managing condition and habits.
4.Automatically controlling the single projector and double projectors showing. When projecting by double projectors, can control the switching action of the two projectors automatically, and the program can recognize the aluminum foil signal if it is auto-changing signal or projection finishing signal.
5.Has the display function for program process and time lag.
6.Has the distinguishing function for xenon lamp faults or film- breaking faults, can make an alarm and turn off the projector.
7.Can use manual switch to control the projector and other equipments in the cinema when something happened.
8.Overall dimension: 483¡Á175¡Á116mm, and can be installed on 19¡¯¡¯ standard machine frame.
9.Weight: 3.54KG
The groupware for film breaking examining:
It is installed under the projector head, and by using it to check the film breaking and input the film breaking signal into the controlling system, then send order to make the projector motor turn off, xenon lamp turn off and shut the sound and light door.
When film breaking happened, the alarm on the projector will ring, and the relative indicator light will shine. |
|
